Generic SIP VoIP device settings & configuration Guide

Generic SIP VoIP device settings & configuration Guide

Generic SIP VoIP device settings & configuration Guide

SIPcity supports most SIP-based VoIP devices including Analog Telephone Adaptors (ATA), IP Phones, IP PBX systems, and Softphones.

While our goal is to make all installations as easy as possible, this option is intended for advanced users. SIPcity can not provide full technical support for all SIP VoIP devices. If your device is not working as expected, you may need to contact the device manufacturer for technical support.

Generic SIP Configuration for SIPcity

Name: your name

SIP Server Name / Proxy Server : call.sipcity.com.au

User name / Account ID / Authenticate ID: (your account number assigned by SIPcity)

Password: your SIPcitypassword

Register port: 5060

Register with proxy: yes

Make call without registration: no

Codecs: G711, G729a

Port settings for yourcloudteco can be found here

    • Related Articles

    • VoIP Devices Troubleshooting

      VoIP Devices Troubleshooting If you get one-way audio, or cannot get a dial tone or cannot make/receive calls with your VoIP device, you are probably behind firewall. Your router's firewall (also known as NAT) is blocking certain operations of the ...
    • Why Is SIP ALG An Issue?

      Why Is SIP ALG An Issue? What is SIP ALG? SIP ALG stands for Session Initiation Protocol Application Layer Gateway.  It is enabled by default on many commercial routers and internet gateways (modems).This setting modifies SIP packets, which controls ...
    • VoIP Voice and Call Quality Troubleshooting

      VoIP Voice and Call Quality Troubleshooting Calls sound "choppy" In general, "choppy" calls are the result of latency or packet loss in your Internet Service Provider's (ISP) network. In other words, for a period of time your connection may not be ...
    • SIP 401 - Unauthorized

      SIP 401 - Unauthorized SIP 401 - Unauthorized usually means that the request requires user authentication. This error message is returned by the SIP server, only your PBX administrator or VoIP provider know for sure why this reply is being sent to ...
    • SIP 503 - Service Unavailable

      SIP 503 - Service Unavailable **What is the meaning of SIP 503**Service Unavailable **?** Sip 503 service unavailable disconnect code means service is not being provided. In other words, call on the A side can not reach the B side because of some ...